When a freelancer says they've finished onboarding but their profile disagrees, you can see which stage is still open and who has to act next. Then you can move them forward and get them ready for Tasks, Contracts and invoices sooner.

Who can do this: Any team member who can open talent profiles can check a status. Adding a workflow to someone needs Can send invites to Partners. Moving people between stages needs an admin, or the stage manager for that stage. Finishing a workflow for them needs an admin. Availability: Accounts that use onboarding workflows. Your workspace may use a different name for Partners, such as Freelancers, Talent or Contractors. The steps are the same.

TABLE OF CONTENTS


What each onboarding status means

The icon next to a freelancer's name on directory cards, in the table view and on their profile shows their status. Hover over the icon to read it. A green tick with no hover text means Fully onboarded.

StatusWhat it meansWhat to do
Not invitedYou added the profile but haven't invited them yet.Invite them.
Invitation pendingThey were invited but haven't accepted. They must accept from the inbox the invitation was sent to.Check the email address and resend the invitation if needed.
Not OnboardedThey aren't in any workflow that counts toward onboarding, or they were disqualified from it.Add an onboarding workflow (see below).
Onboarding underwayAt least one workflow that counts toward onboarding is still open.Find the open stage (see below).
Fully onboardedThey finished every workflow assigned to them that counts toward onboarding.Nothing. Check bank and tax details before you pay them.
Unsigned documentA document is waiting for their signature.Ask them to sign it.
Has requested document expiredA document you requested from them has passed its expiry date.Ask them to upload a current one.

The Status filter in the talent directory uses the onboarding values, plus Not Invited, Pending and Registered. Those three describe the freelancer's account, not their onboarding, so a freelancer can be Registered and Not Onboarded at the same time.


How the status is set

A workflow counts toward onboarding only when Mark partner as fully onboarded on finish is ticked in its settings. On your list of workflows, the Required column shows which ones have it.

  • A freelancer becomes Fully onboarded when they finish every one of these workflows assigned to them.
  • If they're in several, they stay Onboarding underway until the last one finishes.
  • Workflows without this option don't change the status. A freelancer who finishes only those stays Not Onboarded.
  • If none of your workflows have this option ticked, every registered freelancer shows Fully onboarded.

Find what's still outstanding

To check from the freelancer's profile:

  1. Open the freelancer's profile. The directory list doesn't show stages.
  2. Select the More info tab.
  3. Open the section for each workflow the freelancer is in. You'll see the stages and what the freelancer has entered in each one.

To open the workflow itself, click its name in that section.

To check from the workflow:

  1. Go to Workflows → Workflows and open the workflow.
  2. Click the freelancer's name.
  3. Select Current stage to see what they've entered so far, or Stages to see which stages are done and when.

Work out who needs to act

To see what kind of stage is open, open the workflow and click Edit workflow. Each stage shows a label. Only admins see Edit workflow.

Label on the stageWho acts
InternalYour team. The stage manager for that stage, or an admin, fills it in and clicks Save and proceed. The freelancer can't see this stage.
ManualThe freelancer fills it in. Then a stage manager or an admin moves them to the next stage.
AutomaticThe freelancer fills it in, and they move to the next stage on their own when they submit it.
No label (action stage)Nobody. Worksuite runs it, for example to send an agreement. If someone is stuck here, contact Worksuite Support.

If the open stage is a document request that needs verification, the team member who reviews documents clicks Verify to finish it.


Bank and tax details show as private

On the More info tab, you may see Tax Information private or Payout Methods private instead of the details. This means your role doesn't include access to the freelancer's tax information or bank details. The freelancer may still have completed them.

To confirm they're complete without seeing them:

  1. Open the workflow and click the freelancer's name.
  2. Select Stages. If your workflow has Bank Details and Tax Information stages and both show as done, the freelancer submitted them.
  3. When you schedule their invoice, check for a message. If you don't see "Partner has missing tax information." or "Partner has incorrect or missing payout method.", their details are on file.

You can also contact Worksuite Support with a link to the freelancer's profile. Support can confirm whether their bank and tax details are complete, but can't share the details themselves.

To see the details themselves, ask an admin on your team to check your role, or to check the details for you. A team member whose role includes tax information can download the freelancer's W-9 with Download W9 Form in the Tax Information section of the More info tab.


Why a freelancer appears twice in the same workflow

Each time a freelancer is assigned a workflow, they get their own run through it. Open the workflow. In its list of people, the Context column shows where each run came from:

ContextWhat it means
Assigned internallySomeone on your team added the workflow directly, with Manage workflows on the freelancer's profile or Add partners in the workflow.
A Contract nameThe run belongs to that Contract.
A job opening name, labeled Job openingThe run belongs to that job opening.

So a freelancer can show up twice in one workflow, for example once as Assigned internally and once for a Contract. Each run has its own progress. A freelancer stays Onboarding underway until every run that counts toward onboarding is finished.

Clear a duplicate run

Important: Removing a workflow from a freelancer deletes their progress and stage history in that run. If you add it again, they start at the first stage.
  1. Compare the two entries. Keep the one that's further along, or the one tied to the Contract or job opening you're working on.
  2. If the extra entry is Assigned internally and was added by mistake, open the freelancer's profile, open the actions menu and choose Manage workflows.
  3. Untick the workflow and click Apply.

You'll see "Workflows have been updated." If the extra entry belongs to a Contract or job opening, or you didn't add either entry yourself, contact Worksuite Support with a link to the freelancer's profile and the workflow name. Don't remove a run you're unsure about.


Common reasons a freelancer isn't fully onboarded

No onboarding workflow is assigned

Freelancers who were bulk-imported or added directly don't get a workflow automatically. Registering from an invitation doesn't always add one either. Add one with Manage workflows (steps below).

A second workflow or run hasn't started

Another assigned workflow, or a second run of the same workflow, is still at its first stage. Ask them to complete it, or remove it if it was added by mistake.

An internal stage has no stage manager, or the manager is away

Internal stages are hidden from the freelancer, so they can't move it forward. Add a stage manager to the stage, or ask an admin to review it and click Save and proceed. See How to Manage Workflows: Stages, Stage Managers and Moving Talent.

A stage was filled in but not saved

The freelancer added something, such as a portfolio, but didn't click Save changes, Continue or Submit on that stage. Changes made in their profile, Settings or Documents don't always complete a workflow stage. Ask them to open the stage from their onboarding and save it.

A document is waiting to be verified

If a document request needs verification, the stage stays open until someone on your team clicks Verify.

The workflow doesn't mark freelancers as onboarded

If Mark partner as fully onboarded on finish is off, finishing the workflow doesn't change the status. Edit the workflow, tick the option and click Save workflow.


Add, remove or move a freelancer through a workflow

To add or remove a workflow:

  1. On the freelancer's profile, open the actions menu and choose Manage workflows.
  2. Tick the workflows to add, or untick the ones to remove.
  3. Click Apply.

You'll see "Workflows have been updated." Adding a workflow emails the freelancer so they can start. Removing one deletes their progress and stage history in it. To do this for several freelancers, select them in the talent directory and choose Manage workflows.

To move a freelancer forward, open the workflow and use the actions menu on their row:

  • Send reminder notification reminds them about a stage they need to complete.
  • Move to stage moves them to a different stage.
  • Finish onboarding finishes the workflow for them. Only admins see this option.

You can also write to them from the Messages tab on their stage. For the rules on moving people, see How to Manage Workflows: Stages, Stage Managers and Moving Talent.


Fully onboarded doesn't mean payable

To schedule an invoice, a freelancer also needs valid bank details and tax information. A workflow without Bank Details and Tax Information stages can finish without them. Scheduling then shows "Partner has missing tax information." or "Partner has incorrect or missing payout method."

To collect these details from everyone, add the Bank Details and Tax Information stages to your onboarding workflow. See Global Pay: Payable Requirements for Freelancers.


What incomplete onboarding can block

Depending on how your account is set up:

  • Contracts: you'll see "This partner hasn't finished the required onboarding yet. Until this happens, you won't be able to make the Contract live."
  • Tasks: you can't make the Task live until the freelancer is fully onboarded.
  • Invoices: when the freelancer tries to add an invoice, they see a Complete onboarding message.

Onboarding belongs to your company's account. If a freelancer finished onboarding with another company that uses Worksuite, that doesn't count for yours.


Troubleshooting

The status didn't change after the last stage finished

The status updates on its own. Refresh the page or open it in a private browser window. Check that no second run of the workflow is still open (see Why a freelancer appears twice above). If it's still wrong, or it changed after someone edited the freelancer's email address, contact Worksuite Support with a link to the freelancer's profile and the name of the workflow.

I don't see the More info tab, bank details or tax details

Your role doesn't include that access. Ask an admin on your team to check your role.

I don't see Edit workflow

Only admins can edit workflows. Ask an admin to check the stage labels for you, or open the freelancer's Current stage to see what's waiting.



Support/Resources

Still have questions about onboarding status? Click Support in the bottom-left corner of Worksuite to contact our Support team, or email support@worksuite.com. Including a link to the page you're on and a screenshot helps us answer faster.